Switch Type | SPDT snap switch standard, DPDT snap switch optional |
Weight | 4 lb 9 oz (2.07 kg) |
Model Name/Number | Series L4 |
Brand | Dwyer |
Deadband | 3/4" (19 mm) for standard float |
Electrical Connection | UL and CSA models: 16 AWG, 6" (152 mm) long. ATEX and IECEx units: terminal block |
Conduit Connection | 3/4" (19.05 mm) female NPT standard or M25 with -BSPT option |
Temperature Limits | 4 to 275 DegreeF (-20 to 135 DegreeC) standard |
Model Name/Number | Series L8 |
Brand | Dwyer |
Weight | 5 oz (0.142 kg). |
Specific Gravity | 0.6 minimum |
Mounting Orientation | Horizontal with index arrow pointing down |
Process Connection | 1" male NPT |
Electrical Connections | 18 AWG, 18" (460 mm) long |
Temperature Limit | 212 DegreeF (100 DegreeC) |
Switch Type | DPDT (two form C). |
Model Name/Number | Series CLS2 |
Brand | Dwyer |
Service | Liquids, powder, and bulk materials compatible with wetted materials. |
Pressure Limit | 365 psi (25 bar). |
Enclosure Rating | Weatherproof, NEMA 4X (IP66) |
Electrical Rating | 8 A @ 120/240 VAC res |
Power Requirements | 12-240 VAC/DC |
Brand | Dwyer |
Model | ULSS,ULSM & ULSL |
Measuring Level | 0-3 m |
Process Temperature | -20 to +100 Deg C |
Process Pressure | 30 psi (2 bar) |
Media | Water |
Housing Material | Plastic |
Switching Output | PNP/NPN |
Switching Mode | NO/NC |
Process Connection | 1" NPT,1" BSPP (optional). |
IP Protection Class | IP69K |
Weight | 1 lb (0.45 kg). |
Enclosure Rating | NEMA 6P (IP68) |
Loop Resistance | 400 Q max |
Electrical Connections | 4' (1.2 m) 9 conductor shielded cable |
Model Name/Number | Series F6 & F7 |
Brand | Dwyer |
Service | Compatible liquids |
Weight | F6-HPS-11, 21: 1.23 oz (38 g), F6-MHS-31: 1.41 oz (40 g), F6-MHS: 3.35 oz (95 g), F6-SS: 1.59 oz (45 |
Specific Gravity | F6-SS: 0.65, F6-MHS: 0.85, F6-HPS-11, 21, 31: 0.6 |
Electrical Rating | F7-SB, -SS2 AC: 25 VA, 1.0A, 200 V DC: 10 W, 1.0 A, 200 V F7-PP, -BT, -HSS, -MHS AC: 25 VA, 1.0 A |
Mounting Connection | 1/8" NPTM (all vertical mount), 1/2" NPTM (F7-HPS-2, F7-HSS), M16 x 2 (F7-HPS-1), 1/2" x 13 thread |
Magnet | Alnico (F7-SB, -PP, -BT, -HPS), ceramic (F7-SS2, -HSS, -MHS). |
Switch Type | SPDT snap switch standard, DPDT snap switch optional |
Model Name/Number | Series L6 |
Brand | Dwyer |
Weight | Approximately 1 lb (.5 kg) without external float chamber, 1.75 lb (.8 kg) with external float chamb |
Mounting Orientation | Horizontal with index arrow pointing down |
Process Connection | 1" (25.40 mm) male NPT or 1" (25.40 mm) male BSPT on models without external float chamber |
Upper Body | Brass or 303 SS |
Temperature Limits | -4 to 220 DegreeF (-20 to 105 DegreeC) standard |
Model Name/Number | Series SBLT2 & SBLTX |
Brand | Dwyer |
Output Signal | 4 to 20 mA DC, 2-wire |
Response Time | 50 ms |
Max. Loop Resistance | 900 Q at 30 VDC |
Weight | 2.2 lb (1.0 kg) |
Mounting Orientation | Suspended in tank below level being measured |
Electrical Protection | SBLT2: Lightning and surge protection; SBLTX: None |
Pressure Limit | 2X FS |
Thermal Effect | +-0.02% full scale/ DegreeF |
Model Name/Number | Series WD3 |
Brand | Dwyer |
Weight | 4.85 oz (137.5 g). |
Enclosure Rating | Audible alarm models: Watertight up to 3/4 of the body height; Non-audible alarm models: NEMA 6P |
Minimum Sensing Gap | 1/32" |
Service | Water or conductive fluids |
Electrical Ratings | Battery powered model: Pilot duty rating 250 mA @ 24 VDC; External powered models: 1 A @ 24 VAC/DC |
Battery Life | 5 years steady state / 48 hours during alarm condition |
Temperature Limits | 32 to 122 DegreeF (0 to 50 DegreeC). |
Audible Alarm | At least 85 dB @ 1' distance (depends on model). |
Switch Type | SPST hermetically sealed reed switch. Field adjustable for NO or NC |
Model Name/Number | Series L10 |
Brand | Dwyer |
Service | Compatible liquids |
Wetted Materials | Float: Solid polypropylene or 304 SS; Body: Brass or 303 SS; Magnet: Ceramic; External float chamber |
Temperature Limit | 200 DegreeF (93 DegreeC) |
Enclosure Rating | Weatherproof, meets NEMA 4X (IP66) |
Weight | Approximately 10 oz (0.283 kg) without external float chamber, 2.32 lb (1.05 kg) with external float |
Switch Enclosure | Nylon |
Model Name/Number | Series PBLT2 & PBLTX |
Brand | Dwyer |
Output Signal | 4-20 mA DC, 2-wire |
Response Time | 50 ms |
Weight | 4.3 lb (2.0 kg) |
Electrical Protection | PBLT2: Lightning and surge protection; PBLTX: None |
Mounting Orientation | Suspended in tank below level being measured |
Loop Resistance | 900Q |
Pressure Limit | 2X FS |
Model Name/Number | Series ULT |
Brand | Dwyer |
Accuracy | +-0.2% FS |
Service | Compatible fluids. Not for use with powder and bulk solids |
Ranges | 24.6' (7.5 m), 32.8' (10 m) |
Resolution | 0.079" (2 mm) |
Blind Zone | Under 8" (20 cm) |
Beam Width | 3" (7.6 cm) diameter |
Max. Loop Resistance | 250 Ohms at 24 VDC |